The Heavy Duty Brush Root Grapples are full-featured units with dual, independent grapple arms to handle uneven loads, cushioned cylinders and cylinder/hose guards to protect all cylinder components, hardened 1-1/4 cylinder pivot pins, 100,00 PSI yield strength tine material for increased durability, and standard load check valve for positive clamp force. Comes complete with hoses and flat face couplers.
Rated Operating Capacity at 35% Tipping Load (kg): 1,750 lbs. (794)
Net Power (kW): 68.4 hp (51)
Lift Height (mm): 127.5" (3239)
Tier IV-certified Yanmar diesel engines provide 69.9 hp (52.1 kW)
The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
Optional rear bumper/counterweight provides additional protection and towing capability.
Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised (mm): 123" (3124)
Rated Operating Capacity (kg): 2,200 lbs. (998)
Gross Power (kW): 72 hp (53.7)
Height to Hinge Pin - Fully Raised (mm): 120.5" (3061)
Rated Operating Capacity (kg): 1,900 lbs. (862)
Gross Power (kW): 69.3 hp (51.7)
Maximum Digging Depth (mm): 10' 8" (3250)
Net Power (kW): 23.9 hp (17.8)
Ground Contact Pressure Cab/Canopy (kPa): 5.0/4.8 psi (34.3/33.1)
Maximum Digging Depth (mm): 9' 0.3" (2750)
Net Power (kW): 21.6 hp (16.1)
Ground Contact Pressure Cab/Canopy (kPa): 5.2/5.0 psi (36.0/34.6)
Gehl's 4.5-metric ton Z45 GEN:2 compact excavator features standard auxiliary proportional hydraulics that give the operator infinitely variable control of the
hydraulic flow. and allows the operator to set the ideal flow for the attachment and application.
37.7-hp Yanmar Tier 4 certified diesel engine
Digital Operator Interface shows real time system information, service reminders, and 90 days of
Cab size is increased compared to the former Z45 model
ECO Mode can be activated form the cab with a switch; reduces engine speed by 10% and reduces fuel consumption
Auto Deceleration lowers noise and emissions levels when the hydraulic movement has not occurred
for more than four seconds
Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 350 RPM
Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling
3/4” Capacity: Taps up to 1-inch, 14-threaded holes
Maximum force: Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate
Solid state electronic switching: Offers faster, smoother and quieter switching for a longer product lifespan
Line Lockout: Prevents tool from operating if voltage is restored to an interrupted line
You can install low voltage lighting or hidden pet fence quickly and easily with the EZ-Cable Installer. You are actually installing the wire or cable and backfilling while digging the trench with this machine. The CL7 Model installs wire 7″ deep.
Telescopic booms offer greater horizontal outreach than any other type of aerial platform — perfect for areas with limited access in construction and industrial applications. Genie® telescopic S™-booms are also designed for productivity with the traction and drive speed you need to get around the job site and to the work area.
Ideal for areas with limited access in construction and industrial applications
Minimal tailswing for maneuvering in tight spaces
Dual-fuel (gas or LPG) options available for indoor/outdoor applications
Designed for productivity with the traction and drive speed you need
Super Boom models with horizontal outreach among the industry’s best
Powerful 11 Amp Motor: Provides maximum performance and durability
Job Site Armor™ Technology: Proprietary composite material and crush zone barriers provide long lasting rugged protection
All Metal Direct Drive: Delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive
Gear Protecting Clutch: Extends gear and motor life by absorbing high impact forces caused by blade lock-ups
Revolutionary Cut Visibility: Slimmer motor housing increases user line of site delivering superior cut accuracy
Balanced Body Design: Allows tool to rest naturally and comfortably in users hands
Lighter Weight, 14.5 Lbs.: Delivers more control over the tool and less fatigue at the conclusion of the work day
Tool-Free Locking Adjustable Shoe: Button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds
Industry's Largest Cut Capacity: Versatility to cut up t
All New EDGE Angle Brooms are now available
from CEAttachments. All of the same great
features as previous models, with a few new
enhancements and brush sizes:
• Motor and bearings mounted to a plate which
pins to the brush frame, allowing quick and easy
replacement of brush segments
• Two steps to aid in getting in and out of the cab
• New 26” diameter brush Angle Brooms available
in 48” and 60” widths
• New optional electro hydraulic Angle Kit for both
single and dual motor angle brooms
Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete.
Strip-Serts have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.
Removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups
Strip-Serts are designed to strip away coatings not to grind concrete. Grinding concrete with Strip Serts will dull the sharp edges quickly causing the grinding action to stop.
Dyma Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings.
Dyma-Serts grind 5 times faster than grinding stones and last longer - up to 30,000 square feet (2,800 sq. m.) of grinding action on standard 3,500 PSI concrete. Dyma-Serts can be used for wet or dry grinding.
Smoothing rough surfaces or trowel marks
Repairing surface damage to concrete slabs
Removing urethane or epoxy thincoats
Grinding sharp aggregates such as flint and granite
Removing surface imperfections from epoxy mortars
Leveling high spots
Removing thin mastics and thin-set
22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
Gas, electric & propane power options available
Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
2" Vacuum port and water port
Counter-rotating discs prevent machine from pulling side to side and give operator greater control
6 grinding accessories required per loading
Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
Light grinding or cleaning of concrete surfaces
Leveling uneven joints
Removing mastics, thin-set, high spots, epoxies and urethanes
Lightly texturing slippery concrete surfaces
Collect large quantities of dangerous scrap metal or scattered ferrous metal items with ease. Clear collected debris from sweeper with work gloves or a heavy shop towel. Light aluminum housing. Easy to operate over most terrain. 36” model converts to a hang-type sweeper. All models are 1.75” high by 5” deep (does not include wheel dimensions). Permanent magnetism guaranteed.
Cuts monmouth and other large tile
10" working table on right and 4" on left of breaker bar
Scores tile up to 16" wide and 1 1/2" thick
Long life carbide cutting wheel
1-1/2 Hp wet cutting tile saw with 10" blade capacity and 3-3/4" depth of cut. Rips 20" tile and diagonally cuts 14" tile.
-Fully enclosed high torque, fan-cooled motor
-Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
-Multi-position motor post and cutting head for convenient cutting of various tile sizes
-Built-in water distribution system supplies water to both sides of blade
-Variable height cutting head allows for plunge cuts and use of blades smaller than 10" in diameter
-Accommodates 6" and 8" profile wheels
-Micro V-belt drive
-Blade shaft lock for easy blade removal
-Linear-bearing and chrome plated guide-bar assembly ensure precise cutting
-Cast aluminum blade guard and motor post
-One-piece reinforced zinc-plated steel frame
Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
Folding handle for easy transport & storage
Sharktooth wrench for easy blade changes
Heavy-duty steel material deflector shield
Multiple position hand held assembly
Heavy-duty flexible rubber isolators
Belt-driven oscillating blade system provides 1,850 oscillating hits per minute
Quick release pin angle adjustment
7-Gauge steel welded construction
Push plate & built-in weight make material removal a quick & easy job
Pinch blade system accepts floor stripper blades of any make & size
Steel-mounted wheel scraper
NEW Positive Pressure adding working position
Reinforced head assembly for harder blade contact
NEW & Improved harder hitting machines means more aggressive and faster removal
These additions greatly improve the Tile Sharks<
Quality and durability have allowed the FM Polisher to be called the "Best in the Industry." The motor and gearbox are hand built and backed by an exclusive 7 year warranty.
The Clarke® CFP™ Floor Machines are unmatched in features and are priced at a great value. 13, 17, and 20 inch models are available. The 17 and 20 inch models feature high performance motors in either a 1 hp or 1.5 hp dual capacitor. A 20 inch 1.5 hp dual speed machines is also available
Heavy duty 1-1/2 HP dual capacitor motor
Totally enclosed dust free motor eliminates motor cleaning
40' gray, rubber covered power cable provides longer reach
Rugged cast aluminum construction designed for years of service
Disassembles easily for transport or storage
The Super 7R is a powerful, versatile, and easy to use wood floor edging machine that has earned a reputation as a reliable performer. The Super 7R is designed for productivity and dependability with rugged construction and precision fitted components.
A non-conductive fiberglass step ladder extra-heavy duty capable of supporting 300lbs.
Equipped with Da Boot for slip resistant footing, SHOX system and the ProTop, a non-conductive structural molded top with hardware tray, paint can holder, handyman´s tool slots, pipe holder, curved front of top provides leg comfort and convenient magnet to secure small steel parts.
A non-conductive fiberglass industrial extension ladder with 300lbs. duty rating.
The ladders features outside slide guides, D-shape rungs fully serrated for slip resistant surface, non marring rail end caps, QuickLatch rung lock for better secure operation and swivel safety shoes to be usee as tread down or in spike position.